[TRNSYS-users] Unusually slow run time

[Fred Betz]

I have a simulation that runs the first 200 hours very quickly and then essentially freezes.

If I allow it to continue to run it calculates the next time step in approximately 60 seconds to 5 minutes.

Anyone have any thoughts on why the calculations of each time step are so inconsistent and how to remedy this?

Thanks,

Fred

Fred Betz  PhD., LEED AP
Sustainable Systems Analyst



AEI | AFFILIATED ENGINEERS, INC.
5802 Research Park Blvd. | Madison, WI  53719

P: 608.236.1175 | F: 608.238.2614
fbetz at aeieng.com<mailto:fbetz at aeieng.com>  |  www.aeieng.com<http://www.aeieng.com/>



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100401/9a0f23b9/attachment-0001.htm>