[TRNSYS-users] TRNSYS: Matllab component type 155, compatible with Matlab R2007a

[Matt Duffy]

Dear Michael Casier,

To the best of my knowledge, the Typ155.dll that is distributed with the
current version of TRNSYS (version 16.01.0003) is the MATLAB dll for the
2006 (dated March of 2007). If you have a previous version of TRNSYS, I
suggest contacting your TRNSYS distributor to get instructions to get the
latest copy of TRNSYS. Nonetheless, in an ensuing email, I will send you
the MATLAB DLL in a compressed folder.

Best regards,

Matt Duffy



----- Original Message -----
From: "Michael Casier" <michael.casier at student.kuleuven.be>
Sent: Wed, September 23, 2009 7:15
Subject:[TRNSYS-users] TRNSYS: Matllab component type 155,compatible with
Matlab R2007a

Good afternoon dear TRNSYS-users (and in this case especially Mr.  Duffy)

I'm working on my thesis, and therefore, I have to use the TRNSYS simulation
Program.  I receceived an error message while trying to link TRNSYS with
Matlab.  On
the internet, I found the discussion that I copied at the end of this
message.  I
have exactly the same problem as Mr. Beltramini, because I'm also working
with the
R2006a version of Matlab.

Especially to Mr. Duffy (or someone else who can help me) : Is there a
possibility
that I receive the updated Type 155 component that is compatible with this
version
of Matlab from you, like you gave it to Mr. Beltramini?

Thanks a lot

With kind regards

Michael Casier
Student civil Engineer KULeuven, Belgium

PS: The message I found on the internet:

"Dear Mattia Beltramini,

It appears that you need the updated Type155.dll to run the example. In an
ensuing email, I will send you the Type155.dll for MATLAB 2007.

Best regards,

Matt Duffy



----- Original Message -----
From: "Mattia Beltramini" <mattia.beltramini at unifi.it>
Sent: Mon, May 25, 2009 8:28
Subject:[TRNSYS-users] Calling Matlab Example troubles

Dear Mr/Mrs,



we tried to use the calling Matlab example file, without success. We
have the 16 TRNSYS version and the R2007a Matlab one.

The error messages reported are as follows:



"Message: Your input file uses Type 155 (Calling Matlab). "Type155.dll"
was found but could not be loaded. Please make sure that a supported
version of Matlab is installed and that Matlab's "bin\win32" folder is
on Windows' search path"



"TRNSYS Message 105 : A TYPE was called in the TRNSYS input file but
was either not linked into trndll.dll or was not found in an external
dll. A dummy subroutine was called in its place. Please link the TYPE
or remove it from the input file

Reported information  : Type 155 was not found. Please make sure that
Type155.dll is in the 'Userlib' folder." ""

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users


----- End of original message -----