[TRNSYS-users] TRNSYS: Matllab component type 155, compatible with Matlab R2007a

[Michael Casier]

Good afternoon dear TRNSYS-users (and in this case especially Mr.  Duffy)

I'm working on my thesis, and therefore, I have to use the TRNSYS simulation Program.  I receceived an error message while trying to link TRNSYS with Matlab.  On the internet, I found the discussion that I copied at the end of this message.  I have exactly the same problem as Mr. Beltramini, because I'm also working with the R2006a version of Matlab.  

Especially to Mr. Duffy (or someone else who can help me) : Is there a possibility that I receive the updated Type 155 component that is compatible with this version of Matlab from you, like you gave it to Mr. Beltramini?

Thanks a lot

With kind regards

Michael Casier
Student civil Engineer KULeuven, Belgium

PS: The message I found on the internet:

"Dear Mattia Beltramini,

It appears that you need the updated Type155.dll to run the example. In an
ensuing email, I will send you the Type155.dll for MATLAB 2007.

Best regards,

Matt Duffy



----- Original Message -----
From: "Mattia Beltramini" <mattia.beltramini at unifi.it>
Sent: Mon, May 25, 2009 8:28
Subject:[TRNSYS-users] Calling Matlab Example troubles

Dear Mr/Mrs,



we tried to use the calling Matlab example file, without success. We
have the 16 TRNSYS version and the R2007a Matlab one.

The error messages reported are as follows:



"Message: Your input file uses Type 155 (Calling Matlab). "Type155.dll"
was found but could not be loaded. Please make sure that a supported
version of Matlab is installed and that Matlab's "bin\win32" folder is
on Windows' search path"



"TRNSYS Message 105 : A TYPE was called in the TRNSYS input file but
was either not linked into trndll.dll or was not found in an external
dll. A dummy subroutine was called in its place. Please link the TYPE
or remove it from the input file

Reported information  : Type 155 was not found. Please make sure that
Type155.dll is in the 'Userlib' folder." ""