[TRNSYS-users] Time Step

[Yin Hang]

Hello,

I figure the small time step is easier to get converge.
Normally, I use 0.25.

Thanks.

Yin

 

From: Nicola Sorbi Unipg
[mailto:nicolasorbi at mach.ing.unipg.it] 
Sent: Wednesday, September 23, 2009 6:24 AM
To: TRNSYS ALL USER; techsupport at tess-inc.com
Subject: [TRNSYS-users] Time Step

 

Dear all,

I have a question: Who the Time Step influences the
simulation results?

I have trouble in choosing the correct Time step!!!

Regards 

 



                    Dott. Ing. Nicola Sorbi

              

          UNIVERSITA' DEGLI STUDI DI PERUGIA

           Dipartimento di Ingegneria Industriale

           Via G. Duranti 1A/4 - 06125 Perugia

           Tel. +39 075/5853930 - Fax. +39 075/5853736 

           E-mail nicolasorbi at mach.ing.unipg.it



 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090923/32e9c053/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 4692 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090923/32e9c053/attachment-0002.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 3625 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090923/32e9c053/attachment-0003.jpeg>