[TRNSYS-users] HEATING / COOLING EQUIPMENT EXTERNAL TO TYPE 56

[JUAN FRANCISCO BELMONTE TOLEDO]

hello everyone.
i´d greatly appreciate your help in this question.
 
Reading the Manual Vol. 6 (Multizone Building Modeling) and the tutorial downloadable from the trnsys web, i see clear that to model an external heating/cooling equipment, heating/cooling type in trnBUILD not should be used, instead of that it should be used VENTILATION TYPE MANAGER (for air systems) or GAIN TYPE SYSTEM (for hydronic or refrigerant vapor compression systems).
IT´S THAT CORRECT?
 
In this case (hydronic system, in particular boiler + water radiators)
Is necessary supply the type56 with a hot water loop from the boiler?
what INPUTS AND OUTPUTS are required in this case for type 56?, i´m particularly interested in the OUTPUTS, and its coupling with the hot water circuit.
 
thanks a lot.
 
Juan Francisco Belmonte Toledo
Universidad de Castilla-La Mancha
02071 Albacete. Spain 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20091118/a8b418c0/attachment-0001.htm>