[TRNSYS-users] Type56: Glazing Area

[David Bradley]

Paul,
 It depends on how you define your window. If you define it as an 
"additional window" then you have to manually remove the window area 
from the wall because there is no association between the two. If you 
define the window while you have a wall selected in TRNBuild, then the 
wall area should be the gross wall area (it says "incl. windows" next to 
the area field) and the window area will be removed internally and 
automatically by TRNBuild.
Best,
 David


PAUL COALES wrote:
> Hi Matt,
>
> Can you tell me whether the defined area of a wall ( Type56 ) includes 
> the defined glazing area of that wall.
>
> Thanks
> Paul
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>   

-- 
***********************************************************************
Thermal Energy System Specialists (TESS), LLC 
David BRADLEY                      22 N. Carroll Street - Suite 370 
Partner                            Madison, WI 53703 
                                   USA
P: +1.608.274.2577 
F: +1.608.278.1475
E-mail: bradley at tess-inc.com 
Web Pages:  http://www.tess-inc.com    and      http://www.trnsys.com

***********************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20091116/17d751a7/attachment-0001.htm>