[TRNSYS-users] multiple inverters

[Anton Driesse]

Hi David,

If you're working with PV inverters you might find this database of inverter
parameters useful:

http://sel.me.wisc.edu/trnsys/trnlib/library16.htm#electrical

Cheers,

Anton


On Mon, Jul 27, 2009 at 9:24 AM, Redpath David <D.Redpath at ulster.ac.uk>wrote:

>  Hi,
>    I'm extermely new to TRNSYS so please excuse any stupid questions. With
> TRNSYS can I model a system with more than one inverter? The system I'm
> trying to model is comprised of:
> 4 solar inverters Sunny Boy 2.5 KW each connected to 18 PV panels 138 Wc,
> totalling 10KWp
> • 2 Sunny Island inverters 5 KW in Master /Slave configuration connected to
> battery storage (48V and 2000Ah) when solar radiation is not available
> power is supplied from either the batteries a diesel generator or the AC
> grid
> • Control system managing the whole operation
>
> I've had a go at using the TRNSYS PV inverter example but I'm not to sure
> how I'd build up the above system? Any suggestions are greatly appreciated.
>
> Regards,
>         David
>
>
>
>
> David Redpath
> Research Associate thermal energy storage
> Centre for Sustainable Technologies
> Room 28A02
> School of the Built Environment
> University of Ulster
> Jordanstown Campus
> Shore Road
> Newtownabbey
> BT37 0QB
> d.redpath at ulster.ac.uk
> 028 90368240
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090727/dcf6f92a/attachment-0005.htm>