[TRNSYS-users] multiple inverters

[Redpath David]

Hi,
   I'm extermely new to TRNSYS so please excuse any stupid questions. With TRNSYS can I model a system with more than one inverter? The system I'm trying to model is comprised of:
4 solar inverters Sunny Boy 2.5 KW each connected to 18 PV panels 138 Wc,
totalling 10KWp
• 2 Sunny Island inverters 5 KW in Master /Slave configuration connected to 
battery storage (48V and 2000Ah) when solar radiation is not available power is supplied from either the batteries a diesel generator or the AC grid 
• Control system managing the whole operation 

I've had a go at using the TRNSYS PV inverter example but I'm not to sure how I'd build up the above system? Any suggestions are greatly appreciated. 

Regards,
        David


 

David Redpath
Research Associate thermal energy storage
Centre for Sustainable Technologies 
Room 28A02
School of the Built Environment
University of Ulster
Jordanstown Campus 
Shore Road
Newtownabbey
BT37 0QB
d.redpath at ulster.ac.uk
028 90368240

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090727/461e8e8b/attachment-0005.htm>