[TRNSYS-users] Heat exchanger temperature control
Mario Leroy Ortiz
ortizm at unm.edu
Tue Jan 13 22:06:46 PST 2009
TESS and TRNSYS users,
Please help me with the attached files...
I am having some problems controlling the outlet
temperature of the cold side of a type 5b counter flow
heat exchanger.
I am modeling a plate and frame heat exchanger where the
heat source is a solar thermal array and the cold side
charges a storage tank. Heat is used for a building load.
My example project file is simple.
Water at a constant temperature (65C) is supplied to a
heat exchanger with a varying flow rate (low in morning
and afternoon, high at midday) to mimic what might be
supplied by a solar array.
I am trying to maintain the heat exchanger cold side
temperature (tank heat supply) at 60C using a variable
speed pump and an iterative feedback controller.
Heat is drawn from the tank to the building load.
There are 7 days in the simulation. Day 4 and day 7 seem
to work right.
On the other days, during the last hour of time when solar
thermally heated water is supplied to the heat exchanger,
the cold heat exchanger outlet temperature seems to drop
prematurely due to the cold side pump speeding up. Under
certain unknown circumstances (days 4 and 7), the cold
side pump flow mirrors the hot side pump flow and the cold
side temperature is maintained for most of the time that
solar thermal heat is available. For unknown (to me)
reasons, at other times the cold side pump flow is
sporadic (speeds up rapidly, decreasing the cold side
outlet temperature), especially late in the afternoon.
Attached are the project file and input file for my tank.
This is an example of the problems I am seeing in a larger
project file. This project does not show it, but what I
see in the larger project is the cold side pump turning
off on me when the hot pump is running at full capacity,
causing my solar loop to get very hot.
Any assistance with this problem is appreciated.
Thank you,
Mario Ortiz
-------------- next part --------------
A non-text attachment was scrubbed...
Name: hxProblems1.TPF
Type: application/octet-stream
Size: 161477 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090113/1c8d046a/attachment-0002.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: edittype_531_10nodes.dat
Type: application/octet-stream
Size: 534 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090113/1c8d046a/attachment-0003.obj>
More information about the TRNSYS-users
mailing list