[TRNSYS-users] Highly varying temperatures
Stefan de Kool
s.dekool at chri.nl
Thu Feb 26 07:07:44 PST 2009
Dear all
I am running a project in which I have a high internal load in my building,
which varies at timesteps of about 1 min. Now I understood from the trnsys
manual (6.4.1.14) that trnsys calculates thermal conduction to the wall with
a temperature averaged over the prebid timebase. So with a normal timebase
conduction is averaged over 1 hour and I get jumps in temperature each
hour.. What can I do about this? My walls do not allow a timebase <1 hr
(stability criteria not fulfilled). Any suggestions??
Met vriendelijke groet,
Stefan de Kool
Cauberg-Huygen Raadgevende Ingenieurs BV
Bezoekadres:
Boterdiep 48, 3077 AW Rotterdam
Postadres:
Postbus 9222, 3007 AE Rotterdam
Telefoon:
010 - 4257444
Fax:
010 - 4254443
E-mail:
s.dekool at chri.nl
Web:
www.chri.nl
KvK-nummer:
14623897
Disclaimer:
Op deze e-mail is een disclaimer van toepassing:
A disclaimer is applicable to this e-mail, please refer to:
http://www.chri.nl/emaildisclaimer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090226/2d842c3e/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 7599 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090226/2d842c3e/attachment-0001.gif>
More information about the TRNSYS-users
mailing list