[TRNSYS-users] Question thermostat type 698

[Matt Duffy]

Dear Senne,

I just ran a simulation with Type698, and it worked correctly. I would
assume that you have to mess with the temperature dead band or the other
parameters. You could simply set your setpoint to 17 C with 2 C deg
deadband. Please see attached project.

Best regards,

Matt Duffy

----- Original Message -----
From: "senne plessers" <senne_plessers at hotmail.com>
Sent: Mon, August 31, 2009 4:29
Subject:[TRNSYS-users] Question thermostat type 698

Dear trnsys users,



I have a little problem with thermostat type 698.

I want to control the temperature with the thermostat,

but it doesn't seem to work. The temperatures for heating are

set between 16 and 18°C and for cooling between 24 and 26°C.

If I run the simulation my temperatures are oscillating in a bigger

interval than is should be.



Can someone help me?



Thanks in advance,



Kind regards,



Senne

_________________________________________________________________
Voeg vrienden toe van LinkedIn &amp; Facebook aan je Windows Live
http://profile.live.com/connect

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users

----- End of original message -----

----- End of original message -----