[TRNSYS-users] Problem with parametric run

[Mathieu Riegger]

Dear Panagiotis,
 
I had the same problem and I couldn't find a solution to do parametric
runs from TRNEdit. My solution is to use TRNEdit to create the dck-files
for the parametric runs and to run them with a batchfile (see example
attached; file needs to be renamed to *.bat). Therefore you have to
adjust the directories in the batch file and then double click on the
file icon. If you do not want to see the online plotter or calculation
progress window add /h at the end of the command in the batch file to
hide thes windows (see example batch file).
 
Regards,
Mathieu

________________________________

Von: Panagiotis Tsekouras [mailto:ptsek at cres.gr] 
Gesendet: Donnerstag, 11. September 2008 14:44
An: trnsys-users at engr.wisc.edu
Betreff: [TRNSYS-users] Problem with parametric run



Dear all,

 

Running the simulation with a parametric table in TRNEdit the following
message appears:

"Access violation at address 004041F2 in module TRNEdit.exe. Write of
address 00415F60".

Does anyone know the cause of this message? 

 

Any help would be appreciated. 

 

Thank you in advance,

 

Panagiotis Tsekouras

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080915/25f0c7b4/attachment-0005.htm>
-------------- next part --------------
"R:\Trnsys16_1\Exe\TRNExe.exe" "k:\Simulation\SYSTEM1.dck" /h
"R:\Trnsys16_1\Exe\TRNExe.exe" "k:\Simulation\SYSTEM2.dck" /h
"R:\Trnsys16_1\Exe\TRNExe.exe" "k:\Simulation\SYSTEM3.dck" /h
"R:\Trnsys16_1\Exe\TRNExe.exe" "k:\Simulation\SYSTEM4.dck" /h
"R:\Trnsys16_1\Exe\TRNExe.exe" "k:\Simulation\SYSTEM5.dck" /h
"R:\Trnsys16_1\Exe\TRNExe.exe" "k:\Simulation\SYSTEM6.dck"
"R:\Trnsys16_1\Exe\TRNExe.exe" "k:\Simulation\SYSTEM7.dck"
"R:\Trnsys16_1\Exe\TRNExe.exe" "k:\Simulation\SYSTEM8.dck"
"R:\Trnsys16_1\Exe\TRNExe.exe" "k:\Simulation\SYSTEM9.dck"
"R:\Trnsys16_1\Exe\TRNExe.exe" "k:\Simulation\SYSTEM10.dck"
"R:\Trnsys16_1\Exe\TRNExe.exe" "k:\Simulation\SYSTEM11.dck"
"R:\Trnsys16_1\Exe\TRNExe.exe" "k:\Simulation\SYSTEM12.dck"
"R:\Trnsys16_1\Exe\TRNExe.exe" "k:\Simulation\SYSTEM13.dck"
"R:\Trnsys16_1\Exe\TRNExe.exe" "k:\Simulation\SYSTEM14.dck"
"R:\Trnsys16_1\Exe\TRNExe.exe" "k:\Simulation\SYSTEM15.dck"
"R:\Trnsys16_1\Exe\TRNExe.exe" "k:\Simulation\SYSTEM16.dck"
"R:\Trnsys16_1\Exe\TRNExe.exe" "k:\Simulation\SYSTEM17.dck"
"R:\Trnsys16_1\Exe\TRNExe.exe" "k:\Simulation\SYSTEM18.dck"
"R:\Trnsys16_1\Exe\TRNExe.exe" "k:\Simulation\SYSTEM19.dck"