[TRNSYS-users] export to Excel

David Bradley bradley at tess-inc.com
Wed Sep 10 06:32:24 PDT 2008


Max,
 Try to run your simulation from the Studio but turn on the debugging 
switch (in the component control cards where you change the simulation 
start and stop time). One of the things that the debugger checks is 
whether your component is writing outside of the space that it has 
reserved for itself in the OUT() array. If you get an error saying that 
is the case, look at what you are setting INFO(6) to in your component. 
 From what you describe, it sounds as though your component (or another 
one) is writing in the same memory location as another one.
Kind regards,
 David

Max Werlein wrote:
>
> Dear David, dear TRNSYS users,
>
> As mentioned yesterday I have the Problem that while debugging with 
> the same deckfile .dck as used in the simulation I get an error. I 
> tried it on several computers and the result is the same. I have now 
> replaced my Online plotter (type65d) by a printer an suprisingly I can 
> now debug without getting an error message, which on the on hand is 
> good news, but on the other confuses me completely.  I would be 
> thankfull for any idea.
>
> max
>
> PS: david if you want I can post you my source code if you want to 
> have a look.
>
>
>
>
>
>
>
> ------------------------------------------------------------------------
> Date: Mon, 8 Sep 2008 09:37:30 -0500
> From: bradley at tess-inc.com
> To: pqoecptr at yahoo.fr
> CC: trnsys-users at engr.wisc.edu
> Subject: Re: [TRNSYS-users] export to Excel
>
> Hugo,
>
> Vous pouvez vous servir du Type25 (printer) en spécifiant l'extension 
> *.xls pour le fichier externe.  
>
> You can use Type25 (printer) by specifying the extension *.xls for the 
> external (result) file.
>
> Cordialement,
>  David
>
>
> popov Samir wrote:
>
>     Bonjour,
>
>     Une fois ma simulation faite (TRNEXE) je souhaiterai exploiter les
>     résultats sous Excel mais je n'y arrive pas!
>     J'ai essayé avec le type 65a mais j'obtiens des valeurs nulles
>     dans mes colonnes de résultats.
>
>     Merci de votre aide,
>
>     H.C <mailto:trnsys-users at engr.wisc.edu>
>     ------------------------------------------------------------------------
>
>     Hello
>
>     Once my simulation is done (TRNEXE) I would like to export my
>     results to Excel but it doesn't work fine!
>     I tried with type 65a but excel supply no values in my column
>     (only hours). What can I do?
>
>     Best regards,
>
>     Hugo COIFFARD
>
>
>     ------------------------------------------------------------------------
>
>     _______________________________________________
>     TRNSYS-users mailing list
>     TRNSYS-users at cae.wisc.edu <mailto:TRNSYS-users at cae.wisc.edu>
>     https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>       
>
>
> -- 
> ***********************************************************************
> Thermal Energy System Specialists (TESS), LLC 
> David BRADLEY                      2916 Marketplace Drive - Suite 104 
> Partner                            Madison, WI 53719 
>                                    USA
> P: +1.608.274.2577 
> F: +1.608.278.1475
> E-mail: bradley at tess-inc.com <mailto:bradley at tess-inc.com> 
> Web Pages:  http://www.tess-inc.com    and      http://www.trnsys.com
>
> ***********************************************************************
>
> ------------------------------------------------------------------------
> Express yourself instantly with MSN Messenger! MSN Messenger 
> <http://clk.atdmt.com/AVE/go/onm00200471ave/direct/01/>
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>   

-- 
***********************************************************************
Thermal Energy System Specialists (TESS), LLC 
David BRADLEY                      2916 Marketplace Drive - Suite 104 
Partner                            Madison, WI 53719 
                                   USA
P: +1.608.274.2577 
F: +1.608.278.1475
E-mail: bradley at tess-inc.com 
Web Pages:  http://www.tess-inc.com    and      http://www.trnsys.com

***********************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080910/02fd91ef/attachment-0005.htm>


More information about the TRNSYS-users mailing list