[TRNSYS-users] reason for range data error

[Philipp Lezajic]

Hi all,
 
Trnsys hotline found the reason for my range data error. My Type 56 building model had more than 1000 walls. The limit is 1000. In addition surface numbers above 1000 (or 999, I don`t know exactly) also cause a range data error. So if your total number of walls is below 1000 but some walls have a surface number greater then 1000/999 you have to delete these walls.
 
regards Philipp


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20081021/2a110271/attachment-0001.htm>