[TRNSYS-users] Quick last question concerning TRNDLL.dll

[David Bradley]

Carlos,
 You'll get an error if TRNSYS can't find your Type999.dll. However, if 
you want to check and make sure, the TRNDll.dll should be in the 
..\Trnsys16_1\Exe\ directory and Type999.dll should either be in 
..\Trnsys16_1\UserLib\ReleaseDLLs\ or in 
..\Trnsys16_1\UserLib\DebugDLLs\ depending on which mode TRNDll.dll is 
compiled in. If you didn't change TRNDll.dll (ie if you didn't recreate 
it), it is in release mode and you can make a release mode Type999.dll 
and put it in the ..\ReleaseDLLs\ directory.
Kind regards,
 David


Carlos Flores wrote:
> Hello Matt or David,
>
> So, I think I'm finally understanding the way you do things with 
> FORTRAN, but have a finall question.
>
> I followed all the 8.5 basic steps and now things are way more clear. 
> I'm using Intel visual fortran and Microsoft Visual Studio, and did 
> the TRNDLL.dll build and rebuild steps (I did them using the Solution 
> in the folder %TRNSYS16%/Compilers/\Ivf91-Mvs2005.
>
> Now, the thing is... I added my new type in a project under the same 
> "Solution" and it works fine.
>
> Now, this is my issue now:
>
> 1) Are the new TRNDLL.dll and Type999.dll going where they are suppose 
> to go? or, Should I take those files and copy them somewhere?
> 2) Lets suppose the dll goes directly where they are suppose to go. 
> Now, what should I tell the proforma I created (in TRNSYS) so it knows 
> that it has to do what the Type999.dll file says?
>
> I think I'm really close to be able to modify the way I want all the 
> stuff... I only need these final indications.
>
> Thanks one more time for the help.
>
> Carlos Flores
> PRIEN
> Universidad de Chile
>
>
>
>
> On Fri, Oct 10, 2008 at 1:08 PM, Matt Duffy <duffy at tess-inc.com 
> <mailto:duffy at tess-inc.com>> wrote:
>
>     Dear Artemi Spanaki,
>
>     Perhaps my manual is not the same as yours.  I was trying to reference
>     section 8.5 "Instructions to rebuild TRNDLL.dll and other dynamic link
>     libraries". I recommend looking over that section. Please remember
>     that
>     the TRNSYS Simulation Studio is simply a graphical front-end.  To
>     rebuild
>     the TRNDLL, if that is indeed what you are trying to accomplish,
>     you have
>     to do that in your Fortran compiler.  Again, that section in the
>     manual
>     lays that out clearly.
>
>     Best regards,
>
>     Matt Duffy
>
>
>
>
>     ----- Original Message -----
>     From: spanakiart at hotmail.com <mailto:spanakiart at hotmail.com>
>     Sent: Fri, October 10, 2008 2:05
>     Subject:[TRNSYS-users] Additional question about dll
>
>
>     Dear sir and trnsys users
>
>     Sorry for being so boring with my questions, but I can't even
>     found the
>     way to have
>     access to 'TRNDll files', on simulation studio. The only way to
>     find these
>     files is
>     through the explorer. This is why I can't follow the instructions
>     of ref.
>     8.4.9.4 <http://8.4.9.4> in
>     page 8-111.
>
>     Is there any chance of having that problem because of an error in my
>     installation?
>     I have the 16.00.0038 TRNSYS version.
>     In username I get the message of please enter user id.
>     Thank you very much.
>     Yours sincerely
>
>     Artemi Spanaki
>
>     _________________________________________________________________
>     Connect to the next generation of MSN Messenger
>     http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=wlmailtagline_______________________________________________
>     TRNSYS-users
>     <http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=wlmailtagline_______________________________________________TRNSYS-users>
>     mailing list
>     TRNSYS-users at cae.wisc.edu <mailto:TRNSYS-users at cae.wisc.edu>
>     https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
>     ----- End of original message -----
>
>     _______________________________________________
>     TRNSYS-users mailing list
>     TRNSYS-users at cae.wisc.edu <mailto:TRNSYS-users at cae.wisc.edu>
>     https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>   

-- 
***********************************************************************
Thermal Energy System Specialists (TESS), LLC 
David BRADLEY                      2916 Marketplace Drive - Suite 104 
Partner                            Madison, WI 53719 
                                   USA
P: +1.608.274.2577 
F: +1.608.278.1475
E-mail: bradley at tess-inc.com 
Web Pages:  http://www.tess-inc.com    and      http://www.trnsys.com

***********************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20081013/20cb6a87/attachment-0001.htm>