[TRNSYS-users] Transfer function

Julien L'Hoest julien.lhoest at gmail.com
Thu May 8 06:54:19 PDT 2008


Ok I assigned a massless material and it works. Increasing the timebase
didn't work.

Do massless materials absorb solar irradiation like massive materials ?

Regards,

Julien.

2008/5/8 Eleni Ampatzi <ampatzie at cardiff.ac.uk>:

> Dear Julien,
>
> You can modify the timebase in TRNBUILD, through the 'PROJECT' main window
> and by clicking
> 'OUTPUTS'.
>
> Sometimes you might need to assign a massless material to solve similar
> problems.
>
>
> Best Regards
>
> Eleni Ampatzi
> WSA Cardiff University
>
> >>> "Julien L'Hoest" <julien.lhoest at gmail.com> 08/05/08 12:54 PM >>>
> Dear all,
>
> I had this message with type 56 :
>
> UNABLE TO FIND A ROOT AFTER INDICATION THAT A ROOT EXISTED
>
>  CHECK THE WALL TYPE AFTER THE LAST CALCULATED WALL
>  OFTEN THE WALL CAPACITY IS TO SMALL TO CALCULATE A TRANSFER FUNCTION !
>
>  CHECK ALSO YOUR TIMEBASE !
>
> Is it possible to modify the timebase  ? I'm trying to model a thin roof.
>
> Regards,
>
> Julien L'Hoest.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080508/dd307216/attachment-0001.htm>


More information about the TRNSYS-users mailing list