[TRNSYS-users] TESS libraries problem

[David Bradley]

Filippo,
   You should not need to add the TESS Library 
components to the Fortran workspace or rebuild 
the TRNDll.dll in order to use those components. 
If the TESS Libraries are installed in the proper 
location, you should find a series of DLLs in the 
..\Trnsys16\UserLib\ directory. Those DLLs are 
loaded by TRNSYS when you run a simulation. The 
notices that you are receiving indicate that the 
components you are trying to use are not being 
found anywhere. Please check in the 
..\Trnsys16\UserLib directory and make sure that 
there are no subdirectories called \ReleaseDLLs 
or \DebugDLLs. If there are, then move the 
contents of 
..\Trnsys16\UserLib\ReleaseDLLs\***.dll to 
..\Trnsys16\UserLib\***.dll, and try to run the simulation again.
Kind regards,
  David


At 02:50 3/3/2008, Filippo Busato wrote:
>Dear All,
>                    here at the university of 
> Padova (Department of Management and 
> Engineering) we have a version of TRNSYS 
> 16.00.0038, and we got the cd of TESS libraries for geothermal, version 2.
>
>I tried to use those types (e.g. horizontal 
>buried exchanger), after adding the new types to 
>theworkspace and having properly rebuilt Trnsys in the Fortran environment.
>The simulation doesnt' start and the following error messages are shown:
>
>i. 
>"TESSLibrary_PVThermalModels_ReleaseVersion_NotForDistribution.dll" 
>was found but did not contain any components from the input file.
>
>ii. "TYPE 154.dll" was found but did not contain 
>any components from the input file.
>
>iii. "Type152.dll" was found but did not contain 
>any components from the input file.
>
>iv. "Type153.dll" was found but did not contain 
>any components from the input file.
>
>v. "Type154.dll" was found but did not contain 
>any components from the input file.
>
>vi. TRNSYS Message    199 : TRNSYS found at 
>least one user DLL in the UserLib directory. 
>(Note: Only DLL's including Types that are used 
>in the simulation are loaded)  Reported 
>information  : 0 user DLLs were loaded after 
>searching in "C:\Programmi\Trnsys16\UserLib"
>
>Can you please help me to run those types properly?.
>
>Thanks a lot
>Filippo
>
>
>--
>
>------------------------------------------------------------------------------------------ 
>
>Filippo Busato - Ph.D.
>ingegnere
>
>Università degli Studi di Padova
>Dipartimento di Tecnica e Gestione dei sistemi industriali
>Str.lla S.Nicola, 3 - 36100 Vicenza (VI)
>
>mailto: <mailto:busato at gest.unipd.it>busato at gest.unipd.it
>homepage: 
><http://www.gest.unipd.it/%7Ebusato>http://www.gest.unipd.it/~busato
>
>skype: foucault76
>tel: +39 0444 998846
>fax: +39 0444 998884
>mob: +39 347 1207174
>------------------------------------------------------------------------------------------
>
>_______________________________________________
>TRNSYS-users mailing list
>TRNSYS-users at engr.wisc.edu
>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users

****************************************************************************************
Thermal Energy System Specialists (TESS), LLC
David BRADLEY                           2916 Marketplace Drive - Suite 104
Partner                                        Madison, WI 53719
Phone: (608) 274-2577 USA
Fax: (608) 278-1475
E-mail: bradley at tess-inc.com
Web Pages:  http://www.tess-inc.com     and      http://www.trnsys.com

"Providing software solutions for today's energy engineering projects"
****************************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080306/16f4e015/attachment-0001.htm>