[TRNSYS-users] type 696

[Technical Support]

Volker,
 If parameter 1 is set to 1, the input for absolute humidity ratio will be
used by the model as the basis of its calculations and set points will be
expected as absolute humidities as well. If parameter 1 is set to 2,
relative humidity inputs and set points will be expected. The "more"
button is correct and the documentation is incorrect.
Kind regards,
 David




Technical Support Team
Thermal Energy System Specialists, LLC
2916 Marketplace Dr, Suite 104
Madison, WI 53719
techsupport at tess-inc.com

>----- Original Message -----
Subject: [TRNSYS-users] type 696
Date: Wed, June 4, 2008 7:44
From: "Volker Huckemann" <volker at igs.bau.tu-bs.de>

> Dear Mr.Thornton,
>
> trying to use your type 696 I have som difficulties:
> First with parameter 1- My manual told me that the type work with
> relative humidity by the  value 1  - the more button in the type tells
> it the other way round. Which is true?
> I want to work with the type 696b heating and humidifying, but at the
> moment it only works as a heater...
>
> Thanks for your advice,
>
> with best regards
>
> Volker Huckemann
> Dipl.-Ing. Architekt
> ______________________________________
> Institut für Gebäude- und Solartechnik
> TU Braunschweig
> Mühlenpfordtstr. 23
> 38106 Braunschweig
>
> Tel.: 0531-391 3633
> Fax: 0531-391 8125
>
> Web: www.igs.bau.tu-bs.de
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
>