[TRNSYS-users] Control Cards -weather data

[Technical Support]

Dear Artemi Spanaki,The control card in the "settings" file menu will set the start and stop time for all new projects that you create in TRNSYS.  In the assembly menu in the simulation studio, the time is set for only that specific project that is open.  That sounds like the correct way to use the external weather file.  You will get an error if it does not work.Best regards,Matt DuffyTechnical Support Team Thermal Energy System Specialists, LLC 2916 Marketplace Dr, Suite 104 Madison, WI 53719 techsupport at tess-inc.com
----- Original Message -----From: "Artemi Spanaki" >;spanakiart at hotmail.com

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080724/c648f9f5/attachment-0005.htm>