[TRNSYS-users] Wrong number of outputs

[Roel De Coninck (3E)]

Dear TRNSYS users,

I try to simulate a ground buried pipe with the TESS components type 709
and 711.  Unfortunately, I get the following error:
Fatal Error at time   :         0.200000
    Generated by Unit     :   115
    Generated by Type     :   711
    TRNSYS Message     28 : The listed input referenced an output number
beyond the allocated outputs for the connected type.
    Reported information  : Unit 115 Type 711 Input 5 Connected to Unit
118 Type 709 Output 9

The model does not seem to accept the (cyclic) outputs from the type
709.  When i do not connect those outputs the model works.
Does anybody know how to solve this problem?    I add the part of the
model that creates the problem.

Kind regards,
Roel

 <<BuriedTess.rar>> 

> --------------------------------------------------------
> 3E nv/sa
> Engineering a sustainable energy future
Vaartstraat 61 Rue du Canal
B-1000 Brussels
> 
> T +32 2 217 58 68 
> F +32 2 219 79 89
www.3e.eu
> 
Roel De Coninck
Direct tel: +32 2 229 15 18
roel.deconinck at 3e.eu

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080226/45581dd8/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: BuriedTess.rar
Type: application/octet-stream
Size: 9313 bytes
Desc: BuriedTess.rar
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080226/45581dd8/attachment-0005.obj>