[TRNSYS-users] Unable to run due to weather data file formating. Any help is most welcome

[Matthias Kersken]

Hi Kenji!

TRNSYS supplies a special TYPE109 (standard format) for reading *.tm2-files.
If you have tot use TYPE109-user, you need to write a file-header, as it
is described in the manual, cap. 5.14.2.5.

Good Luck to you!
Matthias Kersken

---

On Mi, Dezember 10, 2008 13:14, henry cod wrote:
>
>
>
> Hi ALL,          I have encountered problem getting my system to run
> recently. I am currently working on a simulation using Singapore weather.
> I did use the weather data file from
> trnsys\TRNSYS16\Weather\Meteonorm\Asia\SG-Singapore-Airp-486980.tm2.
> However, i was not able to run the simulation.
>          I did an overall check on all my components. i suspect that the
> problem might be due the way i format the weather data reading
> and processing function 'Type-109 User'. Sadly, i am not able to
> solve the issue.
>          I have attached a sample of my problem above. Please do take a
> look.
>          Any help is most welcome. Thank You.
>
>          Have a nice day to all.
>
> Regards,
>
> Kenji
>
> Final Year Undergraduate Student
> Nanyang Technological University
> timetosoarus at hotmail.com
> _________________________________________________________________
> NEW! Get Windows Live FREE.
> http://www.get.live.com/wl/all


-- 
Cand.-Ing. Matthias Kersken
Fraunhofer-Institut für Bauphysik /
Fraunhofer-Institute for Building Physics
Fraunhoferstr. 10
D-83626 Valley
eMail: Matthias.Kersken at hoki.ibp.fhg.de
Tel.: +49/(0)8024/643-204