[TRNSYS-users] Type204_phase change materials in walls

[Diego A. Arias]

Dear Fabien,

Type204 is not a standard component, but I may be able to help you.
Please feel free to send me the files required to run your project, and 
a description of the error message that you get.
Best regards,

Diego

Fabien MELENEC wrote:
> Dear TRNSYS users
>  
> I would like to know if it is possible to use more than one Type204 
> (simulating PCM in wall) in a multizone simulation.
> When I run the simulation with one type204 for each zone I have an 
> error message.
> Thanks for your help
>  
> Best regards
>  
> Fabien MELENEC
> Tel : 05.62.66.92.53
>  
> Sté ADDENDA
> Service administratif et direction
> RN d'Auch
> 32300 MIRANDE
>  
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>   


-- 
Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706