[TRNSYS-users] Type204_phase change materials in walls

Wed Mar 14 07:16:26 PDT 2007

Dear TRNSYS users

I would like to know if it is possible to use more than one Type204 (simulating PCM in wall) in a multizone simulation. 
When I run the simulation with one type204 for each zone I have an error message.
Thanks for your help

Best regards

Fabien MELENEC
Tel : 05.62.66.92.53

Sté ADDENDA
Service administratif et direction
RN d'Auch
32300 MIRANDE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070314/6904f7a1/attachment-0001.htm>