[TRNSYS-users] Problem using type-16

[Christos Stergiou]

Hello everyone,
I am trying to study the energy consumption of an hypothetic office building in Athens according to each orientation using type-56. I have data only for total radiation, temperature and relative humidity and therefore i am trying to use type-16 to get values for the beam radiation needed in type-56. The data are imported with type 9a. The problem is that i get too many warning messages that beam radiation exceeds the extraterrestrial radiation and that the total radiation exceeds the solar constant. I tried using type-16a and 16c with all possible tilted surface modes (perez model, reindl model etc.) but i managed only to reduce the messages while the output values of my study are not acceptable since i conclude that northern windows are preferable to southern ones. Also i have to mention that as i am turning the building and the azimuth of each surface is changing, error occurs because of the number of the warning messages and as a result i can't run the project.  The minimum warning messages occurred using type 16a with perez model. I ran again the project using type-109tmy2 with different data acquired from meteonorm, where type 16 is not needed, and no problem occurred. Any help or suggestion is appreciated.
 
                                                                                                                       Thanks in advance,
                                                                                                                               Christos
_________________________________________________________________
Play free games, earn tickets, get cool prizes! Join Live Search Club. 
http://club.live.com/home.aspx?icid=CLUB_wlmailtextlink
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070620/d627df62/attachment-0005.htm>