[TRNSYS-users] how to modelize the exhaust fan in the TRNbuild?

[Adrien JEZEQUEL]

Dear Yuyun,

In TRNBUILD, you're just able to define air change of ventilation, 
temperature of air flow and its relative humidity. 

The best way to model your own fan is to define all of ventilation 
characteristics as inputs in TRNBUILD, and build the fan you need 
directly in the Studio. Then, connect appropriate fan outputs 
(Temperature, Air flow, Relative humidity) to Type56 inputs.

In Type 56, equal amounts of air are assumed to leave the zone at the 
zone temperature, with same flow rate as ventilation rate.

Best regards, Adrien

Yujun TAO a écrit :
> Dears users,
> Is it possible to modelize the exhaust fan in the TRNbuild?
> Thanks
> Yujun
>
> ------------------------------------------------------------------------
> Ne gardez plus qu'une seule adresse mail ! Copiez vos mails 
> <http://fr.rd.yahoo.com/mail/mail_taglines/trueswitch/*http://www.trueswitch.com/yahoo-fr/> 
> vers Yahoo! Mail
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>   

-- 

***************************************************************
Adrien JEZEQUEL	
Ingénieur en Simulations Dynamiques
ITF (Ingénierie Tous Fluides)
87, route de Chambéry
73230 ST ALBAN EN LEYSSE
FRANCE
Tel: 04.79.75.00.29
Website: www.itf.biz
Mail : a.jezequel at itf.biz

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20071207/bcd05462/attachment-0005.htm>