[TRNSYS-users] Request

[Samuele]

Dear all,

I have a problem with this simple model: it's a closed circuit in which I have a pump and a linear parabolic concentrator,
linked each other with:   
   
                     1. Outlet temperature and outlet flow rate of the pump with inlet temperature and inlet flow rate of the linear parabolic concentrator;

                     2. Outlet temperature and outlet flow rate of the linear parabolic concentrator  with inlet temperature and inlet flow rate of the pump.

In this way I can realize a closed circuit in which I can see the state of a diatermic oil's temperature. The problem is that, when I start the simulation, 
immediately ( after only 30 hours) the simulation stops because an error occurs: it's written that the inputs to the listed units have not converged. 

Could anyone give me any advices about what's the problem and how i can solve it? ( There is the model enclosed) .

Thanks in advance,
                              Samuele Mazzei.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070403/be96f5a8/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Project.tpf
Type: application/octet-stream
Size: 109982 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20070403/be96f5a8/attachment-0005.obj>