[TRNSYS-users] TYPE57

[Diego A. Arias]

Dear Ming,

Please feel free to send me the project file that is giving you that
problem. From your explanation, you should not get that error message.
Best regards,

Diego


Liu, Ming - liumy008 wrote:
> Dear all,
> I used a Unit Conversion Routine (Type57) in my simulation to convert
> pressure Pa to Atm. The parameters in Type57 I filled in are:
> Table Nb. for input:10
> ID number from table for input: 3
> ID number from table for output: 4
> The error message is: TRNSYS cannot understand the units of an input
> supplied to the unit conversion routine. But the input is the output
> of the standard weather data reader.
> Can anyone give me some advices on how to solve this problem?
> Thanks a lot!
> Cheers,
> Ming
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>   
-- 

Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706