[TRNSYS-users] Radiant Floor System in Type 56

[roberto-bruno at libero.it]

ASPAM=antispamwpk42

Dear all,
I'd want to know if is possible to simulate a radiant system with capillary pipes imposing laminar conditions for the fluid using prebid 4.0. I haven't understood the mean of "number of fluid loops" in active layers definition. Are the pipes connectded by pipe coil with the same value of mass flow rate or the mass flow rate is divided by the number of pipes in the floor? In fact, the aim of my job is to simulate a radiant system where the pipes are in parallel and the mass flow rate is divided in every pipe, in accordance with the attached picture.
Any suggest is welcome.
Best regards to all.


------------------------------------------------------
Mutui a tassi scontati da 30 banche. Richiedi online e risparmia...Servizio gratuito. www.mutuionline.it
http://click.libero.it/mutuionline30ott

-------------- next part --------------
A non-text attachment was scrubbed...
Name: TypeOfRadiantFloor.jpg
Type: image/jpeg
Size: 50418 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20061030/f37a3a16/attachment-0005.jpg>