[TRNSYS-users] U value

[Timo Sengewald]

Samir,
 
in the window "Output Data" select the thermal zone and then the NType for
the u-value. Double click the row with "u-value" in the field of selected
NTypes. Select the surfaces you need to examine.
 
Best Regards
 
Timo



________________________________________________
Timo Sengewald

BLS Energieplan GmbH
Elsenstra?e 106
D-12435 Berlin
Tel.: +49 30 53 32 81-0
Fax: +49 30 53 32 81-40


www.bls-energieplan.de


-----Ursprungliche Nachricht-----
Von: trnsys-users-bounces at engr.wisc.edu
[mailto:trnsys-users-bounces at engr.wisc.edu] Im Auftrag von Chehal, Samir
Gesendet: Montag, 30. Oktober 2006 15:43
An: trnsys-users at engr.wisc.edu
Betreff: [TRNSYS-users] U value



Dear all,

I would like to print the window U value.

In TRNBUILD, I select :  Window/Project/Outputs/Add/Surface outputs/ u-value
(NTYPE 50) and I got the message < please select one window > but the
problem is that I can't select the window.  

How can I do to select the window?

Thanks in advance.




=========================================================

NOTICE - This communication may contain confidential and privileged 
information that is for the sole use of the intended recipient. Any viewing,
copying or distribution of, or reliance on this message by unintended
recipients is strictly prohibited. If you have received this message in
error, please notify us immediately by replying to the message and deleting
it from your computer.

========================================================= 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20061031/ff81c2e7/attachment-0001.htm>