[TRNSYS-users] type155-coupling matlab with trnsys

[Marijke Steeman]

Dear all, 

I wrote a small program in matlab using an m-file. Now I would like to couple the m-file with the Trnsys Studio and call the m-file every timestep. Therefore I used type 155 and I followed the recommendations from the example I found in the manual. However I keep getting an error at "mFileErrorCode"150, so something seems to be wrong trying to do the necessary calculations. Does someone have an idea what I am doing wrong? I am sending the m-file and project-file in attachement.

Thanks a lot in advance,
Best regards,

marijke

ir-arch Marijke Steeman
Universiteit Gent
Vakgroep Architectuur en Stedebouw
Jozef Plateaustraat 22
9000 Gent
tel 09 264 37 52
fax 09 264 41 85
marijke.steeman at ugent.be



ASPAM=antispamwpk42
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20061023/c42bef00/attachment-0001.htm>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: test.m
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20061023/c42bef00/attachment-0001.asc>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: koppeling trnsys - matlab.TPF
Type: application/octet-stream
Size: 53298 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20061023/c42bef00/attachment-0001.obj>