[TRNSYS-users] type 9 problem

[Constanze.Bongs at csiro.au]

Hi,
 
I am new to using TRNSYS and have run across the following problem which
I could not resolve using the manual or the mailing list archives. It is
probably really easy but I would be very happy if someone could give me
a "helping hand".
 
I want TRNSYS to read data (temperatures and relative humidity) from an
excel file and use that data as input to a building model. The data in
the sheet is taken at time steps of  5 minutes. I tried using TYPE 9 to
read it.  However, when I try running the simulation (or Type 9
separately) I get the following error messages:
1.) The system does not seem to allow me to input data time steps of
less than 1 hour into parameter 4 (time interval of data) - although it
should if I am well informed. I tried to use hrs as unit and filled in
1/12 or 0,0833 but still the same problem occurred. If I set it back at
1 hr it does not give me the error message any more, but that does not
make sense with the data I want to use.
2.) Using 1 hr (to see if the type works) I get the error message that
the system is not able to read the file correctly. I inserted the path
to the file under external files (and under files in the window that
opens as I click on information). I checked the deck file and it gives
me the right path to the excel sheet. I also checked the excel sheet but
can find no error in the sheet. However, I cannot get TRNSYS to run the
simulation (type 9) and read the file. 
 
Well, hope someone can help.
 
Cheers,
 
Constanze
 
 
-------------------------------------------------------------
Constanze Bongs
CSIRO Division of Energy Technology
Constanze.Bongs at csiro.au <mailto:Constanze.Bongs at csiro.au> 
Ph: 02 4960 6104
fax: 02 4960 6111
-------------------------------------------------------------
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060601/940c08c7/attachment-0005.htm>