[TRNSYS-users] CELLS IN PARALLE IN PV MODULES

[Anton Driesse]

Diego A. Arias wrote:
> Hi Javier,
> 
> Our current components only allow for modules composed by cells in 
> series.  Then, you can say that you are using N modules in parallel. My 
> idea is that you try to model your module of 120 cells (I hope I 
> interpreted right your description), as 2 modules connected in parallel, 
> each containing 60 cells in series.
> Please let me know if this works. This idea seems like a potential for 
> upgrading the pv components.
> Best regards,
> 
> Diego
> 
> javier mota wrote:
>> DEAR ALL:
>> I am javier mota from 3i ingenieri, madrid.
>> I am studying pv modules.
>> now i am looking solarwatt panels of 220 Pn
>> I have read that this module has 60 cells in series and 2 in parallel.
>> I have got good results with other modules, which had 1 cell in parallel.
>> but not with this solar watt.
>> So my question: type 180 pv modules works only for modules composed by a 
>> combination of cells that had only 1 cell in parallel or that would be no 
>> proble,.
>> Where and how may i use of a condiction like "2 cells in parallel"
>> Thanks in advance
>>
>> _________________________________________________________________
>> Horóscopo, tarot, numerología... Escucha lo que te dicen los astros. 
>> http://astrocentro.msn.es/
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at engr.wisc.edu
>> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>>   
> 
>