[TRNSYS-users] CELLS IN PARALLE IN PV MODULES

[Diego A. Arias]

Hi Javier,

Our current components only allow for modules composed by cells in 
series.  Then, you can say that you are using N modules in parallel. My 
idea is that you try to model your module of 120 cells (I hope I 
interpreted right your description), as 2 modules connected in parallel, 
each containing 60 cells in series.
Please let me know if this works. This idea seems like a potential for 
upgrading the pv components.
Best regards,

Diego

javier mota wrote:
> DEAR ALL:
> I am javier mota from 3i ingenieri, madrid.
> I am studying pv modules.
> now i am looking solarwatt panels of 220 Pn
> I have read that this module has 60 cells in series and 2 in parallel.
> I have got good results with other modules, which had 1 cell in parallel.
> but not with this solar watt.
> So my question: type 180 pv modules works only for modules composed by a 
> combination of cells that had only 1 cell in parallel or that would be no 
> proble,.
> Where and how may i use of a condiction like "2 cells in parallel"
> Thanks in advance
>
> _________________________________________________________________
> Horóscopo, tarot, numerología... Escucha lo que te dicen los astros. 
> http://astrocentro.msn.es/
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>   


-- 

Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706