[TRNSYS-users] PMV output in combination with RELHUM output

Mon Jul 24 01:03:15 PDT 2006

Dear TRNSYS users,

In a simulation of an office building, the values of the PMV output in
TRNSYS 15 change depending on whether or not I add a RELHUM output in
prebid. Without a RELHUM-output, the PMV values seem to be erroneous.  Is
this a bug, or am I doing something wrong?

Regards Nick

---------------------------------------------------------------

dr. ir. N.C.J. van der Valk

Cauberg-Huygen Raadgevende Ingenieurs BV

Bezoekadres: Boterdiep 48, 3077 AW ROTTTERDAM

Postadres: Postbus 9222, 3007 AE ROTTERDAM

Telefoon: 010 - 4 25 74 44 

Fax: 010 - 4 25 44 43

Web:  <http://www.chri.nl/> http://www.chri.nl

E-mail:  <mailto:n.vandervalk at chri.nl> mailto:n.vandervalk at chri.nl

------- DISCLAIMER-------

Op deze e-mail is een disclaimer van toepassing:

A disclaimer is applicable to this e-mail, please refer to:

www.chri.nl/emaildisclaimer

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060724/70f044cf/attachment-0005.htm>