[TRNSYS-users] problem with comis

[keilholz, werner]

Delphine, 
 
This type of problem is best investigated in a COMIS stand-alone simulation
(without TRNSYS) first. 
 
This way, you can better understand the airflow modelling phenomena alone
(without the influence from thermal problems) - which is actually one of the
big advantages of using this coupling (you can run the COMIS part without
the TRNSYS side - just click on the COMIS project window (*.cpf) and run a
COMIS simulation with fixed temperatures / wind / etc. Then you can easily
determine the influence of each phenomenon. At the end, go back to the
coupled simulation (.tpf) ). 
 
If you need help on the air flow part, you can use the expertise of the
quite active COMIS user community :
 
http://groups.yahoo.com/group/comis <http://groups.yahoo.com/group/comis> 
 
You will find almost 500 COMIS users and the world's top-experts on air flow
modelling on this group. 
 
Werner 
PS: A similar group exists for CONTAM users:
http://groups.yahoo.com/group/CONTAM/
<http://groups.yahoo.com/group/CONTAM/> 
 
  _____  

De : trnsys-users-bounces at engr.wisc.edu
[mailto:trnsys-users-bounces at engr.wisc.edu] De la part de OCTRUE, Delphine
Envoyé : vendredi 28 juillet 2006 17:21
À : trnsys-users at engr.wisc.edu
Objet : [TRNSYS-users] problem with comis
 
Hello!
 
I try to design a double skin facade with Trnsys and Comis.I have cut the
double skin facade in 4 zones (corresponding to the 4 storeys). The double
skin facade has no mecanical ventilation but has two openings downward and
upward. I don't know how modelize these openings : I want to add a grid
before the air incomming, so I use the type "duct, entry with screen" in
comis. But my simulation in trnsys gives me very high coupling air flow (20
000 kg/h) and no infiltration (although the % of screen is 90). I think it's
not good because in reality, there are dynamic loss which drop the airflow!
Their is also no temperature stratification. When I replace this duct with
an open window, I have more accurate results : air coupling flow with
6000kg/h (but it seems still high), infiltration in the extremity of facade
and temperature stratification.
 
Have somebody already worked on double skin facade? Or does someone know why
the screen gives me bad results?
If you need more information, ask me.
 
Thanks a lot for your answers
Best regards
 
Delphine
--------------------
Les donnees et renseignements contenus dans ce message sont personnels,
confidentiels et secrets. Toute publication, utilisation ou diffusion, meme
partielle, doit etre autorisee. Si vous n'etes pas le bon destinataire, nous
vous demandons de ne pas lire, copier, utiliser ou divulguer cette
communication. Nous vous prions de notifier cette erreur a l'expediteur et
d'effacer immediatement cette communication de votre systeme.

Any data and information contained in this electronic mail is personal,
confidential and secret. Any total or partial publication, use or
distribution must be authorized. If you are not the right addressee, we ask
you not to read, copy, use or disclose this communication. Please notify
this error to the sender and erase at once this communication from your
system.
	
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060731/23037d40/attachment-0001.htm>