[TRNSYS-users] Multiply defined symbols, STEC type 205, dll linking error

[Paul.Kohlenbach at csiro.au]

Hi,
 
I am trying to implement the STEC type 205 (CIEMAT turbine) into my dll
using CVF66 and TRNSYS 16.
The type requires a subroutine called gas.for. I have added the
following line to gas.for to convert it into legacy mode:
 
      !DEC$ATTRIBUTES DLLEXPORT :: GAS
 
It compiles OK but then I do get the following linking error:
 
Linking...
Gas.obj : error LNK2005: _ENTHALPY already defined in Comv-phy.obj
Gas.obj : warning LNK4006: _ENTHALPY already defined in Comv-phy.obj;
second definition ignored
   Creating library Release/TRNDll.lib and object Release/TRNDll.exp
Release/TRNDll.dll : fatal error LNK1169: one or more multiply defined
symbols found
Error executing link.exe.
 
Looks like it clashes with the Type 56 which uses the comv.phy.obj
Can anyone give me advice how to solve this problem?
 
Thanks, cheers
 
Dr.-Ing. Paul Kohlenbach
Postdoctoral Research Fellow
Distributed Generation
CSIRO Energy Technology
10 Murray Dwyer Circuit
Steel River Estate
Mayfield West, 2304  NSW,  Australia
Tel: (02) 4960 6107
Fax: (02) 4960 6111
Email: paul.kohlenbach at CSIRO.au
 
P please consider the environment before printing this email
________________________________________________________________________
__
 
PLEASE NOTE 
The information contained in this e-mail may be confidential or
privileged. Any unauthorised use or disclosure is prohibited. If you
have received this e-mail in error, please delete it immediately and
notify the sender by return email. Thank you. To the extent permitted by
law, CSIRO does not represent, warrant and/or guarantee the integrity of
this communication has been maintained nor the communication is free of
error, virus, interception or interference.
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060830/8141b579/attachment-0001.htm>