[TRNSYS-users] TRNSYS 16 - Type25b (User-Supplied Units) Prob lem

[keilholz, werner]

Hi again, 
 
I just tried out the 25b, and it seems to work OK.
 
I guess the trick is that you have to enter the right number of user defined
units in the "Special Cards" tab. If you don't, you may get surprising
results indeed, because TRNSYS tries to use pieces of the next unit for the
missing data, or your additional units for the next one. 
 
Per default there are lots of units in the special cards tab, you have to
delete the one you don't use (depending on how many columns you want in your
data file).
 
If you can't get it to work, feel free to send us a sample project.
 
Werner 
 
  _____  

De : trnsys-users-bounces at engr.wisc.edu
[mailto:trnsys-users-bounces at engr.wisc.edu] De la part de Edward Halawa
Envoyé : mardi 8 août 2006 08:36
À : trnsys-users at engr.wisc.edu
Objet : [TRNSYS-users] TRNSYS 16 - Type25b (User-Supplied Units) Problem
 
Dear All,
 
Type 25b (User-Supplied units) seems to have problem. I have had the
following error message a number of times with various projects. Usually,
the error message appear after a number of runs and when you edit the
connections to this TYPE. Unfortunately, the TRNSYS 16 error diagnostics
(see below) doesn't seem to be able to detect this problem and provide a
solution.
 
My solution so far is: simply change this to Type25c ... never use type 25b.
 
======================================================
*$UNIT_NAME Type25b

*$MODEL .\Output\Printer\User-Supplied Units\Type25b.tmf

*$POSITION 820 153

*$LAYER Outputs #

       Unit1                               Unit2
Unit3                               Unit4
Unit5               
       Unit6                               Unit7
Unit8                               Unit9
Unit10              
* 1 Printing interval

 
*** Fatal Error at time   :         0.000000
    Generated by Unit     : Not applicable or not available
    Generated by Type     : Not applicable or not available
    TRNSYS Message     48 : The TRNSYS processor has reported that an
unrecognized control card was found while trying to read the input file.
This error can be caused by underspecifying a required number of items in
the input file.  For example, specifiying only 9 parameters after a
"PARAMETERS 10" card has been read can cause this error. The line that
caused this error is listed in the reported information below.
    Reported information  : STEP
============================================================================
=============================================
 
ehalawa
 
_______________________________________________ TRNSYS-users mailing list
TRNSYS-users at engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060808/ea4b3532/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Project3.zip
Type: application/octet-stream
Size: 15001 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060808/ea4b3532/attachment-0001.obj>