[TRNSYS-users] Cooling with lake water

Desmedt Johan johan.desmedt at vito.be
Fri Apr 21 00:23:59 PDT 2006


Dear TRNSYS users, 

I'm looking for a type in TRNSYS for simulating a pond or lake with water (volume: 600000 m³, depth: 10 m) for cooling purposes. The temperature at the bottom of the lake is around 6°C.  Is there a type available in the TRNSYS library which could could serve for this application? A model with stratification possibilities would be nice. 
Thanks a lot!!
Johan Desmedt 

========================================
Johan Desmedt
VITO
Expertisecentrum Energietechnologie
Boeretang 200
B-2400 Mol (Belgie)
tel: +32.14.33.58.41
fax: +32.14.32.11.85
email: johan.desmedt at vito.be
http:\\www.vito.be
======================================== 




---
This e-mail, any attachments and the information it contains are confidential and meant only for the use of the addressee(s) only.  Access to this e-mail by anyone other than the addressee(s) is unauthorized.  If you are not the intended addressee (or responsible for delivery of the message to such person), you may not use, copy, distribute or deliver to anyone this message (or any part of its contents) or take any action in reliance on it.  In such case, you should destroy this message and notify the sender immediately.  If you have received this e-mail in error, please notify us immediately by e-mail or telephone and delete the e-mail from any computer.
All reasonable precautions have been taken to ensure no viruses are present in this e-mail and its attachments.  As our company cannot accept responsibility for any loss or damage arising from the use of this e-mail or attachments we recommend that you subject these to your virus checking procedures prior to use.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20060421/46c98774/attachment-0001.htm>


More information about the TRNSYS-users mailing list