[TRNSYS-users] active layer in prebid

[Arie Kalkman]

Hello Julio,

To me the situation you want to model is not very clear:
If you really have one thermal zone, you might as well join the three separate decks into one deck. 
If for some reason you really need to model three decks, you will very likely end up with three different thermal zones.

When you are considering to model a three-storey house, then the adjacent-wall solution is the right one.

Kind regards, 

Arie

-----Oorspronkelijk bericht-----
Van:	Julio Rojo Alonso [SMTP:jrojoalonso at hotmail.com]
Verzonden:	donderdag 10 november 2005 20:36
Aan:	trnsys-users at engr.wisc.edu
Onderwerp:	[TRNSYS-users] active layer in prebid

Hello everybody

I'm trying to model a radiant floor heating, but prebid doesn't allow me to 
add an active layer into an internal wall. The house has three decks (same 
thermal zone), so the radiant floor must be an internal wall. The only 
solution I can imagine is dividing the three decks into three different 
thermal zones, although they have the same temperature, so the floors could 
be defined as adjacent walls. But I think there must be an easier way to 
solve this problem. Any idea?

Thanks in advance
Kind regards

_________________________________________________________________
Un amor, una aventura, compania para un viaje. Registrate gratis en MSN Amor 
& Amistad. http://match.msn.es/match/mt.cfm?pg=channel&tcid=162349

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at engr.wisc.edu
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users