[TRNSYS-users] parametric table with type 56

[Diego A. Arias]

Dear Christophe:

Unfortunately, the renaming of the output files only occurs in files 
that have the same file name as the input file.

An alternative could be to take advantage of the possibility that TRNSYS 
can be run from the command line.  If you type 'TRNExe.exe  Input.dck', 
TRNSYS will start and execute the input file Input.dck  This alternative 
allows you to run batch files.  For example, you can have in your batch 
file:

"C:\Program Files\Trnsys16\Exe\TRNExe.exe" "C:\Program 
Files\Trnsys16\MyProjects\input1.dck" /N
"C:\Program Files\Trnsys16\Exe\TRNExe.exe" "C:\Program 
Files\Trnsys16\MyProjects\input2.dck" /N

In this case, TRNSYS will start and run input1.dck, close, open again 
and run input2.dck.  The command /N tells TRNSYS not to display the 
dialog box at the end of the simulation.

This may not be the cleanest solution, since you will have to create the 
input files by hand, but I do not know of another way to work out this 
problem.
Please let me know if you need additional information of how to 
implement this.
Best regards,

Diego

Enertech wrote:

> Dear TRNSYS Users,
>
> In a building simulation study, I want to do a batch simulation by 
> changing automatically several parameters. So, I would like to use 
> TRNEDIT and a parametric table. My problem is that the file I want to 
> use,"Energy_zone.bal", is overwritten at each simulation and that I 
> don't know how to increment this file name.
>
> I know that the output file must have the same name that the *.trd 
> file to be incremented but I don't know how to change the name of 
> energy_zone.bal.
> As a solution, I'm trying to recalculate the data contained in the 
> file "energy_zone.bal" with direct outputs of the *.bui file, but I 
> don't know how to calculate QTRANS and QSOLGAIN (see volume 6 part 2, 
> page 103), these variables are not direct outputs.
> So, what do you think I should do ?
>
> Thanks a lot for your help.
> Christophe
>
> ===========================
> ENERTECH
> F-26160 FELINES SUR RIMANDOULE
> tel-fax : 04 75 90 18 54
> Email : sidler at club-internet.fr
> Web  : http://sidler.club.fr
> ================================
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users


-- 

Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706