[TRNSYS-users] Range Check Error

Bharath Krishna Karambakkam krishna at cdhenergy.com
Fri Nov 18 05:41:02 PST 2005

          I have had this problem before. There seems to be a problem in 
having schedules defined for hour 23 to 24 and running the simulation with 
less than 1 hour time step. Check to see if you have any schedules from 23 
to 24 and change it to maybe 22 to 24.
This may be your problem but I am not sure.All the best.


----- Original Message ----- 
From: "William D. Rittelmann" <brittelmann at ibacos.com>
To: <trnsys-users at engr.wisc.edu>
Sent: Thursday, November 17, 2005 5:49 PM
Subject: [TRNSYS-users] Range Check Error

> Has anyone had any success using Type 56 in TRNSYS 16 with sub-hourly 
> timesteps? The model runs OK at a 1-hour timestep, but anything less than 
> an hour and the program aborts 23 hours into the simulation. I have tried 
> increasing and decreasing the time base of the walls, keeping in mind that 
> it needs to be an integer multiple of the timestep, but this hasn't 
> helped.
> Thanks,
> Bill Rittelmann
> IBACOS, Inc.
> ***E-mail Confidentiality Notice***
> The information contained in this e-mail message and any attachments may 
> constitute confidential information.  The information is intended only for 
> the use of the intended recipient.  You are hereby notified that any 
> dissemination, distribution or copying of this communication by anyone 
> other than the intended recipient is strictly prohibited. If you have 
> received this communication in error, please notify the sender by reply 
> e-mail and delete this message and any attachments thereto.  Thank you.
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users

More information about the TRNSYS-users mailing list