[TRNSYS-users] Range Check Error

William D. Rittelmann brittelmann at ibacos.com
Thu Nov 17 14:49:30 PST 2005


Has anyone had any success using Type 56 in TRNSYS 16 with sub-hourly timesteps? The model runs OK at a 1-hour timestep, but anything less than an hour and the program aborts 23 hours into the simulation. I have tried increasing and decreasing the time base of the walls, keeping in mind that it needs to be an integer multiple of the timestep, but this hasn't helped.
 
Thanks,
Bill Rittelmann
IBACOS, Inc.

***E-mail Confidentiality Notice*** 
The information contained in this e-mail message and any attachments may constitute confidential information.  The information is intended only for the use of the intended recipient.  You are hereby notified that any dissemination, distribution or copying of this communication by anyone other than the intended recipient is strictly prohibited. If you have received this communication in error, please notify the sender by reply e-mail and delete this message and any attachments thereto.  Thank you.




More information about the TRNSYS-users mailing list