[TRNSYS-users] How to make a TRNSED executable?

[Diego A. Arias]

Dear Maurice,

My guess is that your userId does not allow you to create the TRSNED 
applications, therefore it does not activate the 'Create distributable' 
menu.  I would suggest contacting your distributor in order to upgrade 
your userId and create distributable applications. 
Best regards,

Diego



Jong, M.J.M. (Maurice) wrote:

>Dear TRNSYS users,
>
>More than a year ago I made my last TRNSED (in TRNSYS 15) executable, but right now I forgot how to do.
>
>I made a TRNSED file and in TRNSHELL (TRNSYS 15). I have the TRNSED and the SOURCE screen and my model runs well. When I go to TRNSED menu, the Create distributable menu is not active so I do not know how to make a TRNSED distributable. Does anybody know how to do this ?
>
>With kind regards,
>
>Maurice Jong. 
>
>
>==================================================================================
>
>Maurice Jong
>ECN - Energy research Centre of the Netherlands		Department: DEGO
>P.O. Box 1    1755 ZG  Petten				Country:   The Netherlands
>Telephone:    +31 (0)224 564938				Fax:       +31 (0)224 568966
>E-mail: jong at ecn.nl					Internet: http://www.ecn.nl/dego
>
>==================================================================================
>
>
>
>_______________________________________________
>TRNSYS-users mailing list
>TRNSYS-users at engr.wisc.edu
>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>  
>


-- 

Diego A. Arias
TRNSYS Coordinator
Solar Energy Laboratory
University of Wisconsin - Madison
1500 Engineering Drive
Madison, WI 53706