[TRNSYS-users] meaning of the inputs of type56

David Bradley bradley at tess-inc.com
Tue Dec 13 21:12:31 PST 2005

   By default Type56 requires the inputs of ambient temperature, ambient 
relative humidity, effective sky temperature (sometimes called "fiktive sky 
temperature") and then total solar radiation, beam radiation, and solar 
incidence angle for each of the orientations defined in the building. 
Additionally, Type56 may require any number of other inputs as defined in 
the .bui file. The inputs that you list (SOG, SEG, SBURO, ABLOG, ABLEG, 
ABLBU, BRIGHT, and TLAGER) are not standard inputs but are inputs that have 
been defined by whoever created the .bui file that you are running. If you 
open the .bui file in TRNBuild, you should be able to determine what the 
inputs are being used for. If you cannot, I would advise you to contact 
your distributor directly. If you aren't sure who to contact, please feel 
free to email me your TRNSYS user id number and I can tell you who you 
should contact.
Kind regards,

At 21:12 12/13/2005, candy he wrote:
>Dear all,
>Could anyone please tell me the meaning of the inputs of type 56? 
>Actually, these inputs bother me a lot during the simulation. Thank you.
>Best Regards,
>TRNSYS-users mailing list
>TRNSYS-users at engr.wisc.edu

Thermal Energy System Specialists (TESS), LLC
David BRADLEY                           2916 Marketplace Drive - Suite 104
Partner                                        Madison, WI 53719
Phone: (608) 274-2577 USA
Fax: (608) 278-1475
E-mail: bradley at tess-inc.com
Web Pages:  http://www.tess-inc.com     and      http://www.trnsys.com

"Providing software solutions for today's energy engineering projects"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20051213/526b4784/attachment-0001.htm>

More information about the TRNSYS-users mailing list