Betr.: [TRNSYS-users] trnsys15-type 56, 68, 34 solar control

[Xavier Dequaire]

Thank you Sabina and Isabelle,

I understand the ideas. I am quite new to trnsys and it seems to be quite
tedious

I use Prebid->Isiibat to describe my building,
In Prebid, to preserve the integrity of my model,  I guess


1- I should create a new wall = my window with the given new orientation.
Sabina, Do you write this directly in the bld-file?

OR

2- in Prebid, for the description of a window, there is an option called:
«external shad. factor»
where it is possible to get an input! But I do not find it again in my
input list in IISIBAT.
I do not find any doc about this kind of input.

thank you

Xavier D.
=======
Ne vous laissez pas faire
http://www.defipourlaterre.org
Agissez maintenant!
=======

> Dear Xavier,
>
> To include type 34 you should do the following:
>
> - For each type of overhang (horizontal) or wingwall (vertical) you should
> include a seperate type 34 in your TRNSYS studio model. (For example, for
> all windows facing south and having a 1 m overhang you create one type 34
> with the correct parameters (see documentation)
> - In your TRNbuild model you create a new orientation, for example
> SOUTH_OVERH
> - For the windows with this overhang you choose this orientation > save
> project
> - In your TRNsys studio model you connect tha radiation processor (or
> calculator) with tye 34, and type 34 with the building.
> - In the connection radiation-type 34 you connect the solar zenith angle,
> solar azimut angle, total horizontal radiation and horizontal beam
> radiation, and the beam radiation and incidence angle of the orientation
> the window with the overhang is facing (in this example: south).
> - In the connection between type 34 and type 56 you connect the first two
> and the last outputs of type 34 with the corresponding inputs of type 56
> that belong to your newly created orientation (in this example
> SOUTH_OVERH).
> - If I did not foget anything, the simulation should work by now.
>
> I hope this is hepful to you, If you want I can send you an example.
> (I don not know much about how to simulate distant objects giving shade)
>
> Regards,
> Sabine
>
>>>> "Xavier Dequaire" <xavdeq at futurich.com> 23-08-05 13:38 >>>
> HI all,
>
> I have used so far type 56 to describe a building (passive solar)
> Next step is to explore strategies to limit solar gains.
>
> There are some tools I found
> type 68 shading mask
> type 34  overhang and wing wall
>
> I did not find information on how to integrate this to my model
> Especially to put in relation a specific overhang to a specific window.
>
> As for sources of shadow due to distant objects and landscape, I assume I
> can use Meteonorm to generate a new weather file taking it into account
> for the solar radiation on the whole building.
>
> thanks for help
> Xavier D.
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at engr.wisc.edu
> https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
>
> ______________________________________________________________________________________
> Deze binnengekomen e-mail is door de KPN gecontroleerd op alle bekende
> virussen.
> This inbound message to KPN has been checked for all known viruses by KPN
> MailScan
> (IV-Scan), powered by MessageLabs.
> For further information visit: http://www.veiliginternet.nl
> ______________________________________________________________________________________
>
>
> ______________________________________________________________________________________
> Deze verzonden e-mail is door de KPN gecontroleerd op alle bekende
> virussen.
> This outbound message from KPN has been checked for all known viruses by
> KPN MailScan
> (IV-Scan), powered by MessageLabs.
> For further information visit: http://www.veiliginternet.nl
> ______________________________________________________________________________________
>