[TRNSYS-users] parametric run

[Isabelle BRUYERE]

Thanks a lot Michaël, that will help.

Another question now...  For every run, type 56 needs two files named 
buildingN.trn and buildingN.bld where N is the number of the run.
I would like to use always the same file (so, without the "N"), is it 
possible ?
If not, is there a simple way to generate these files or do I have to 
manually copy n times a file and change their names n times ?

Thanks again in adavnce,

Isabelle


A 09:32 21/09/2004 -0500, Michaël Kummert a écrit :
>Isabelle,
>
>>I am trying a parametric run.  I am wondering if I'm doing things right. 
>>I create a trnsys file in IIsiBat. I open the so created  .dck file in 
>>TRNSHELL. I replace some equations by a CONSTANT statement and create my 
>>parametric table.
>>But if I make any modification in IIsiBat, when I come back into 
>>TRNSHELL, I have to do these two operations again. Is that right ? (I 
>>hope mu explanation is not too confused...)
>
>Unfortunately you are correct. There is no way back to IISiBat once you 
>started editing a deck file in TRNSHELL (that is, there is a way back but 
>you loose most changes).
>Please note, however, that you can have CONSTANTS statements in IISiBat. 
>You just have to enter them by hand in the "Simulation Cards" field in 
>"Control Cards". You can use the constants in the project by typing their 
>name in an initial value or parameter field (after setting the "type" to 
>"string"). That way you can setup your simulation completely in IISiBat 
>and just use TRNSHELL to run the parametric study.
>
>Kind regards,
>
>Michaël Kummert
>
>
>--
>_________________________________________________________
>
>Michaël Kummert
>
>Solar Energy Laboratory - University of Wisconsin-Madison
>1303 Engr Res Bldg, 1500 Engineering Drive
>Madison, WI 53706
>
>Tel: +1 (608) 263-1589
>Fax: +1 (608) 262-8464
>E-mail: kummert at engr.wisc.edu
>
>SEL Web Site: http://sel.me.wisc.edu
>TRNSYS Web Site: http://sel.me.wisc.edu/trnsys
>_______________________________________________
>TRNSYS-users mailing list
>TRNSYS-users at engr.wisc.edu
>https://www.cae.wisc.edu/mailman/listinfo/trnsys-users

Isabelle Bruyère
Université Catholique de Louvain                        Place du Levant, 1 
à 1348 Louvain-la-Neuve
Unité d'architecture - Architecture et Climat           Tél : 010/47 21 38 
- Fax : 010/47 21 50
http://www-climat.arch.ucl.ac.be/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20040921/47b20d28/attachment-0005.htm>