<html>
Thanks a lot Michaël, that will help.<br>
<br>
Another question now... For every run, type 56 needs two files
named buildingN.trn and buildingN.bld where N is the number of the run.
<br>
I would like to use always the same file (so, without the "N"),
is it possible ?<br>
If not, is there a simple way to generate these files or do I have to
manually copy n times a file and change their names n times ?<br>
<br>
Thanks again in adavnce,<br>
<br>
Isabelle<br>
<br>
<br>
A 09:32 21/09/2004 -0500, Michaël Kummert a écrit :<br>
<blockquote type=cite class=cite cite>Isabelle,<br>
<br>
<blockquote type=cite class=cite cite>I am trying a parametric run.
I am wondering if I'm doing things right. I create a trnsys file in
IIsiBat. I open the so created .dck file in TRNSHELL. I replace
some equations by a CONSTANT statement and create my parametric
table.<br>
But if I make any modification in IIsiBat, when I come back into
TRNSHELL, I have to do these two operations again. Is that right ? (I
hope mu explanation is not too confused...)<br>
</blockquote><br>
Unfortunately you are correct. There is no way back to IISiBat once you
started editing a deck file in TRNSHELL (that is, there is a way back but
you loose most changes).<br>
Please note, however, that you can have CONSTANTS statements in IISiBat.
You just have to enter them by hand in the "Simulation Cards"
field in "Control Cards". You can use the constants in the
project by typing their name in an initial value or parameter field
(after setting the "type" to "string"). That way you
can setup your simulation completely in IISiBat and just use TRNSHELL to
run the parametric study.<br>
<br>
Kind regards,<br>
<br>
Michaël Kummert<br>
<br>
<br>
-- <br>
_________________________________________________________<br>
<br>
Michaël Kummert<br>
<br>
Solar Energy Laboratory - University of Wisconsin-Madison<br>
1303 Engr Res Bldg, 1500 Engineering Drive<br>
Madison, WI 53706<br>
<br>
Tel: +1 (608) 263-1589<br>
Fax: +1 (608) 262-8464<br>
E-mail: kummert@engr.wisc.edu<br>
<br>
SEL Web Site:
<a href="http://sel.me.wisc.edu/" eudora="autourl">http://sel.me.wisc.edu</a><br>
TRNSYS Web Site:
<a href="http://sel.me.wisc.edu/trnsys" eudora="autourl">http://sel.me.wisc.edu/trnsys</a><br>
_______________________________________________<br>
TRNSYS-users mailing list<br>
TRNSYS-users@engr.wisc.edu<br>
<a href="https://www.cae.wisc.edu/mailman/listinfo/trnsys-users" eudora="autourl">https://www.cae.wisc.edu/mailman/listinfo/trnsys-users</a><br>
</blockquote>
<x-sigsep><p></x-sigsep>
<font color="#808080"><b>Isabelle
Bruyère<x-tab> </x-tab><x-tab> </x-tab><x-tab> </x-tab><x-tab> </x-tab><x-tab> </x-tab><x-tab> </x-tab><br>
</b>Université Catholique de Louvain
<x-tab> </x-tab><x-tab> </x-tab><x-tab> </x-tab>Place
du Levant, 1 à 1348 Louvain-la-Neuve<br>
Unité d'architecture - Architecture et
Climat<x-tab> </x-tab><x-tab> </x-tab>Tél
: 010/47 21 38 - Fax : 010/47 21 50<br>
<div align="center">
<a href="http://www-climat.arch.ucl.ac.be/" eudora="autourl">http://www-climat.arch.ucl.ac.be/</a><br>
</font></div>
</html>