[Trace-users] DCV in TRACE...how it works?

[Snarski, Marty]

Hello,

 

I've looked through the archives and have seen some information on
modeling DCV.  However, I'm still unsure as to how this is modeled.  The
idea of DCV is to control on an as-needed ("Demand") basis.  This would
be particularly useful in situations such as conference rooms or large
meeting spaces for which you may not have a schedule.  That being the
case, there really is no way to model these energy savings, is there?

 

I'm still baffled as to how the built-in DCV in TRACE works.  Any input?

 

Thanks!

 

Martin Snarski   LEED(r) AP 
Mechanical Engineer 

 



NOTICE:
This e-mail transmission is intended only for the use of the individual or entity named above and may contain information that is confidential, privileged, and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any review, disclosure, copying, distribution, or other use of any of the information contained in this transmission is strictly prohibited. If you have received this transmission in error, please immediately notify the sender by e-mail at the above address and delete it from your computer system; you should not copy the message or disclose its contents to anyone. The content of the message and or attachments may not reflect the view and opinions of the originating company or any party it is representing.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trace-users-onebuilding.org/attachments/20091109/c42da766/attachment.htm>