[Bldg-sim] Expert advice to show minimum efficiency compliance Table 6.8.1C [1 Attachment]

[Javed Iqbal]

Hello,

 I would appreciate your expert advice on selecting 90.1-2010 Baseline
system to show minimum efficiency compliance as given under *Table 6.8.1C*.
One of the proposed project i am working on has two* Chillers*

   1. *One  with Std. Dry Coolers *
   2. Second chiller has special arrangement where the surrounding air of
   cooling tower being cooled (dry bulb) by some sort of misting to increase
   the dry cooler effectiveness during extreme outdoor condition (CZ5A) ~ 80%
   lower water consumption compared to typical water cooled cooling tower. In
   this hybrid cooling tower, evaporation effect is happening but not like
   std. water cooled cooling tower.

​ To show minimum efficiency compliance, *what condenser type do i need to
choose*; Air or Water Cooled in both the Cooling tower type; Std Dry cooler
and Hybrid Dry cooler (see image below)?  ​Also find an attachment to have
more info
​​
​
on the product.



​
​Thank you so much.
regards,​

-- 


Javed Iqbal, LEED AP, CEA
Sr. Energy Analyst
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20180305/f5f655f7/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 347308 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20180305/f5f655f7/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DryCooler_SpraySystem_Additionalinfo.pdf
Type: application/pdf
Size: 1828627 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/bldg-sim-onebuilding.org/attachments/20180305/f5f655f7/attachment-0001.pdf>