[TRNSYS-users] PVT not showing considerable output temperature

[Jeff Thornton]

Jibi - is it possible you have a very large flow rate such that there is a negligible temperature rise across the collector.  If that’s not it I suggest you attach your trnsys project (if it’s version 17 or later) and we can take a look at it.

Jeff - TESS

Sent from my iPhone

> On May 15, 2018, at 9:43 PM, Jibi Jais (지비 제이즈) via TRNSYS-users <trnsys-users at lists.onebuilding.org> wrote:
> 
> Hi
> 
> I have used the PVT solar collector (type 563) for Seoul climate.
> I do not see any temperature increase in the collector fluid outlet temperature (20~25 C) compared to the inlet temperature! I used TMY2 data and have checked the radiation inputs also.
> 
> Do you have any suggestions?
> 
> Thank you
> Jibi
> 
> 
> 
> 
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/trnsys-users-onebuilding.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20180515/7c8c2645/attachment.htm>